MEIZU MX4 - UBUNTU TOUCH ROM - LEAKED
Meizu MX4

MEIZU MX4 - UBUNTU TOUCH ROM - LEAKED

Watch it: http://people.canonical.com/~alextu/…y/recovery.img

Delete "/recovery/recovery.img " ------------------------> http://people.canonical.com/~alextu/tangxi 684.zip scatter and kernel (ROM Ubuntu) :kissing_heart:

last edited by Naphtha

Can normal MX4 flash it without brick ? Thanks :)
EDIT : I have an M461 Chinese MX4

last edited by furious.builder
Meizu MX4

@furious.builder said:

Can normal MX4 flash it without brick ? Thanks :)
EDIT : I have an M461 Chinese MX4

Where did you found this information ? I don’t know if my MX4 is a M461 or a M75

EDIT : I finally found. With CPU-Z, in the tab “System” Kernel version : 3.10.61 (m.75.Flyme_OS_4.5.4.20150727043756), so I have a M75.
img

last edited by robin4002

It’s wrote on my box : http://image.noelshack.com/fichiers/2015/32/1439042546-p50808-155913-1.jpg
EDIT : I also have m75 in CPU-Z, I don’t know what m75 mean

last edited by furious.builder
Meizu MX4

Ok thank, in my box there is also M461. M75 is maybe the name for kernel, or maybe it’s the name of the MX4 Ubuntu edition https://github.com/meizuosc/m75

Maybe but I bought my MX4 well before the release of the Ubuntu edition ^^

I want to try it but I’m a bit afraid, can it cause any kind of brick ?

Meizu MX4

Same for me, I want Ubuntu Touch on my MX4, but I wan’t brick it …
And yes, changing the recovery or flash something with fastboot can brick the phone :/

Meizu MX4

@furious.builder how you want install it? Using SP-Tool like BQ Aquaris 4.5 Android version? I have tested it with 2 phones but is hard because the phone aren’t recognized from the pc. For install it from SP-Tool we need the driver of preloader.

last edited by Naphtha
Meizu MX4

@Naphtha said:

@furious.builder how you want install it? Using SP-Tool like BQ Aquaris 4.5 Android version? I have tested it with 2 phones but is hard because the phone aren’t recognized from the pc. For install it from SP-Tool we need the driver of preloader.

Settings -> about phone -> storage -> connect as -> built-in CD-ROM.
Have you try with this drivers ?

Until it will be a stable release from meizu or canonical I’ll not try, I’m afraid of bricking ;)
I asked to Meizu on facebook :
Here is a preview :

Me : Hi,
I’d like to know, will a Ubuntu Image be released for the normal MX4 ?
Thanks,
Clément.

Meizu : Hi Clement, as soon as there is any news, we will share it on our Facebook page.

Me : Thanks for your quick response ! Is there any hope or should I give up ?

Meizu : Unfortunately, we can’t give out any info right now. As soon as there is any, it will be posted on our Facebook page immediately.

It sounds like a “We can’t say ‘yes’ but ‘no’ isn’t a correct aswer”, so they don’t say a clear aswer like “You need a Ubuntu Edition to install Ubuntu”… It’s not clear and I hope I’m right ;)

Meizu MX4

Good new ^^
I will also wait.

Meizu MX4

Testing Hardware Preloader Mode but driver not recognized… 11844287_1698669987032744_746205420_n [8037].jpg 01---GND-BRIDGE [8038].gif 11836569_1634292706845417_1244309735_o.jpg

Why have you connected the GND with “A” ? What does this mean ?

Meizu MX4

I was looking for the “Hardware Preloader Mode”

Looks like your connection to Meizufans was lost, please wait while we try to reconnect.